Information about Synergy 8.6m Concealed Floor System by Sensormatic
Exceptional, invisible Sensormatic anti-theft protection for virtually any retail environment.
The Sensormatic Synergy 8.6m Concealed Floor System delivers exceptional, yet discrete, Acousto-Magnetic (AM) EAS protection for wide retail environments. This system provides protection for exits up to 8.6m (28.5ft) and a vertical detection zone of up to 1.2m (4ft), emitting an audible alert to notify store associates if protected merchandise passes through the detection zone. For existing retail environments, the AMS3030-A/AL is an ideal solution. Installation simply requires floor cuts in concrete where the antenna cabling is placed. Once secured, flooring material is then applied over the antenna. The AMS3031-A/AL version is intended for pre-construction installation. Its setup protects detection antennas against possible interference if metal or rebar is discovered below the subfloor. Both install options deliver AM EAS detection for wide exits or open architecture requirements.
The optional 3D Overhead Traffic Counting Sensor can also be integrated and configured to provide visibility into shopper visits to help drive drive incremental sales and improve conversion rates. By integrating directional traffic
information with EAS alarm events, the sensors can discern between inbound and outbound traffic. This helps reduce
unintended alarms triggered by shoppers carrying protected merchandise near the exit. The system also includes a
“power-on-demand” feature that puts it into low-power standby operation during user-defined periods, such as off
store hours or periods of low customer activity passing through the system. Normal function returns once customer
activity resumes. While in this mode, the system can save up to 93%* of power requirements. This network-connected system delivers actionable data gathered from stores’ EAS and traffic devices, as well as enables remote diagnostics and system power management.
Through system configuration, “Tags-too-Close” is an offered feature developed to help store associates better manage merchandising of tagged goods at the storefront. This feature helps decrease nuisance alarms to enhance the shopper experience and reduce unnecessary and costly service calls. Another system-configured feature is
Jammer Detection which triggers a system alarm as soon as an electronic signal from a jammer device is detected.
This helps eliminate the threat of would be thieves using this method.
*Based on the 3D Overhead Traffic Counting Sensor and 3030A quad configuration, power requirements savings for other configurations will vary. Actual power savings depend on how many hours/day the AMS9060 is in low-power standby operation.
Retailer Values
- Delivers exceptional protection for wider exits to help maximize flow and optimize floor space
- Enhances loss prevention efforts and increases shopper visibility through network connected store-front alarms and Traffic Intelligence
- For minimal impact on store operations, the AMS3030-A/AL antenna install eliminates costly, large scale excavations
- Helps protect detection antennas against possible interference if metal or rebar are discovered during construction installation for optimal system performance (AMS3031-A/AL only)
- Enhances the shopper experience and maximizes storefront floor space with “Tags-too-Close” feature
- Helps reduce shrink by notifying staff of the presence of a jammer device with a distinct audible alarm
Product Compatibility
Sensormatic AM Sensors
Synergy Pedestals
Pro-Max
Door-Max
Ranger Receivers
Satellite Receivers
Amorphous Core Receiver
3D Overhead Traffic Counting Sensor
Local Device Manager II (LDM II)
UltraLink
Specifications
AMS3030-A/AL & AMS3031-A/AL
Capacitor Board Enclosure
Length……………………………47.5cm (1.55ft)
Width……………………………..37.8cm (1.24ft)
Depth……………………………….8.5cm (3.3in)
Weight………………………….. 2.4kg (5.25lbs)
AMS3031-A/AL
AMS3031-A Floor Loop Antenna
Length (w/o coupling)………..172cm (5ft 7in)
Length (w coupling)……….. 176.9cm (5ft 9in)
Width……………………………93.6cm (3ft 1in)
Height (at coupling)……………… 4.3cm (1.7in)
Weight (conduit & wires)………..8.6kg (19lbs)
AMS3031-A/AL
Antenna Shield Tray
Height……………………………. 2.05m (6.72ft)
Width………………………………1.27m (4.17ft)
Depth (at coupling)……………1.19cm (.469in)
Power Supply (AMS9060)
Electrical
Primary Input
100-120VAC or 220-240VAC @ 50-60Hz
Primary Power Fuse
3.15A, 250V, slo-blow, hi-breaking
Current Draw
(120V) <1.13Arms
(240V) < 0.72Arms
Input Power
(120V) <82.1W
(240V) <90.0W
Transmitter
Operating Frequency…….. 58kHz (±200Hz)
(sync pulse 56kHz
Transmit Burst Duration……………….. 1.6ms
Max. Transmit Current……………..20A peak
Burst Repetition Rate
Based on 50Hz ac……………75Hz or 37.5Hz
Based on 60Hz ac…………….. 90Hz or 45Hz
Receiver
Center Frequency………………… 58kHz Floor Antenna (Tx/Rx)
Cable………………………………….. 4-conductor, shielded, burial-rated
Cap Box Tx/Rx Cable…………… 13m (40ft), 4-conductor, shielded, direct-burial, plenum-rated
Cap Box Comm Cable………….. 13m (40ft), 4-conductor, shielded, plenum-rated
Environmental Constraints
Operating Temperature
0°C to 50°C (32°F to 122°F)
Relative Humidity
0 to 90% non-condensing
Enclosure
IPX0
Evaluated for altitudes up to 3200m (10,500ft)
Declarations
EMC
47 CFR Part 15
RSS 210
Safety (second edition)
UL/EN 60950-1
CSA C22.2.60950-1
CE This product is in conformity with RoHS II Directive 2011/65/EU and REACH Substances of Very High Concern as defined in Regulation (EC) No 1907/2006 and subsequent amendments to both.
Loss Prevention Systems is a leader in shoplifting reduction and a Global Authorized Partner of Sensormatic – Contact us today for info on Sensormatic loss prevention products.
