Detailed Information about Pro-Max by Sensormatic
Not approved for sale in European Countries
A durable, all-weather anti-theft solution ideal for outdoor retail settings.
The high-impact construction and attractive design of the Pro-Max provides all-weather durability and performance;
making it an ideal solution for DIY outdoor patios. This detection system features Sensormatic AM EAS technology for the highest level of theft detection and protection for wide exits up to 10.7m (35ft) with a minimum 1.2m (4ft) of
coverage between pedestals. Multiple pedestal systems can be set up for zone detection and only activate alarms
on the pedestal closest to where a live tag or label is detected. Each pedestal is equipped with integrated visual and
audible alarms to notify store associates if protected merchandise passes through the detection zone.
Through system configuration, “Tags-too-Close” is an offered feature developed to help store associates better manage merchandising of tagged goods at the front of the store. This feature helps reduce unnecessary and costly service calls and decreases nuisance alarms to enhance the shopper experience.
Another system-configured feature is Jammer Detection. This software triggers a pedestal alarm as soon as an electronic signal from a Jammer device is detected; helping eliminate the threat of would-be thieves using this method.
Pro-Max provides in-store EAS and Traffic Intelligence when connected to a compatible data management device to
help better manage store operations.
Retailer Values
- All-weather design can be installed outdoors without an additional cover // Zone detection helps associates quickly pinpoint detection event location
- Built-in visual and audible indicators immediately notify staff of alarm events
- When connected to a compatible data management device, this system provides in-store EAS and Traffic Intelligence to better manage store operations
- “Tags-too-Close” feature helps reduce unnecessary and costly service calls and helps manage merchandising of tagged products at the store front
- Jammer Detection helps reduce shrink by notifying staff of attempts to disable the EAS system using a separate audible alarm
Product Compatibility
Sensormatic AM Sensors
Local Device Manager II (LDM II)
UltraLink
Stereo Overhead Traffic Sensor
Mono Overhead Traffic Sensor
Digital Remote Alarm
Specifications
Height…………………… 159cm (62.5in)
Width
Pedestal Width………….68cm (26.75in)
Base Shroud Width………..72cm (28.5in)
Thickness/Depth
Base Shroud Depth……… 10cm (4in)
Weight……………….14kg (31lbs)
Electrical
Transmitter
Operating Frequency…….58 kHz (±200Hz)
Transmit Burst Duration………………..1.6ms
Transmit Current……………………. 20A peak
Burst Repetition Rate
Based on 50Hz ac………….. 75Hz or 37.5Hz
Based on 60Hz ac……………..90Hz or 45Hz
Receiver
Center Frequency………………………..58kHz
Receiver Coil Resistance…………. 1.6 ohms (±5%)
Alarm
Alarm Relay Output……….. DPDT contacts
Contact Switching Current………..1.0A max
Contact Switching Voltage……….. 28V max
Environmental Constraints
Ambient Temperature
0°C to 50°C (32°F to 122°F)
Relative Humidity
0 to 90%, non-condensing
Declarations
EMC
47 CFR, Part 15
RSS 210
ICES-003
Safety (second edition)
IEC 60950-1
ZSPM4-OD only
NEMA 3R, IP43
This product is in conformity with RoHS II Directive 2011/65/EU and REACH Substances of Very High Concern as
defined in Regulation (EC) No 1907/2006 and subsequent amendments to both.
Loss Prevention Systems is a leader in shoplifting reduction and a Global Authorized Partner of Sensormatic – Contact us today for info on Sensormatic loss prevention products.
